COPPER CLAD ALSO AVAILABLE
TEST ONE:  translucent plastic sheet in thickness of .010” and available in 24”x36” sheets, suitable for first
check.                              

ALUMINUM ENTRY MATERIAL: thickness .007”; .008”; .010”; .015” with a tolerance of ±.001“.  
Our product is chemically degreased so care should be used to minimize fingerprints.

ALCLAD: a non-abrasive core laminated between two outer skins of special aluminum alloy in thickness of .012”
with a tolerance of ±.001“.  

INNBOARD D ENTRY MATERIAL:  brown glossy entry material in thickness of .010”; .013”; .016”; .024”
with a tolerance of ±.002”.


INNBOARD P ENTRY MATERIAL:   brown, smooth surface less shiny than “D” type; in thickness of .018”;
.024” with a tolerance of ±.002”.

ENTERBOARD ENTRY MATERIAL:   white color with smooth very hard glossy surface in thickness of .013“; .
016”; .024” with a tolerance of ±.002”

MINIBOARD  P21:  tan in color with matte finish in thickness of .020” with a tolerance of ±.002”.  Entry and
routing top for protection.
                      
TRIPLEX 10:  whitish entry material for ultra high accuracy 0.25mm thick.

TRIPLEX 8:   whitish entry material for ultra high accuracy for very small
Drill bits 0.20mm thick


For further information on our materials please contact us at 603-594-0005 or e-mail doscopro@aol.com .
HOME | BACKUP MATERIAL | DRILL SUPPORT MATERIAL | COPPER CLAD